BOSS Audio Systems CER700.2 Chaos Erupt 1400-Watts Full Range Class AB 2 Channel 2-8 Ohm Stable Amplifier with Remote Subwoofer Level Control

Description

• Full-Range, Class A/B Topology
• MOSFET Power Supply
• 2/1 Channel
• Low and High Level Inputs
• Variable LP Crossover
• Full-Range, Class A/B Topology^MOSFET Power Supply^2/1 Channel^Low and High Level Inputs^Variable LP Crossover

View larger Full Range, Class A/B Topology
A class A/B amplifier uses two groups of transistors and it is generally considered to be the best compromise of the two classes put together. A pure class A amplifier typically has an enormous amount of current flowing through its output transistors with no audio signal. A pure class B amplifier has NO current flowing through its outputs with no audio signal. This eliminates virtually all of the crossover distortion thats possible with class B amplifiers. A class A/B amplifier is much more efficient than a class A but without the possible distortion of a class B. As if that wasnt enough, with a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers. By just a flip of a switch from Full to Low, the CER700.2 will change from offering a complete range of frequencies that you need to be able to listen to your 2/3/4 or 5-way speakers to the Low that you need for a subwoofer application. MOSFET Power Supply
MetalOxideSemiconductor Field-Effect Transistor is a transistor used for amplifying or switching electronic signals. We use it in billions of them. In our computers, our telephones, game consoles, cars, electrical appliances and in this case, our Amplifiers. They are found in systems where information is processed or stored. A MOSFET is basically an electrical switch that allows the flow of electrical current. An electrical switch has two possible states, ON or OFF. This is where the MOSFET performs its most important role in our D Class amplifiers by allowing or preventing the flow of power and creating an efficient amplifier.
View larger 2/1 Channel
This feature comes in handy for a few different installation applications and is very multi versatile. The 2 channel means that you are able to simply use the CER700.2 as a 2 channel amplifier by hooking up 2 speakers to it: fronts and rears. The 1 channel means that you can bridge channels 1 + 2 to accommodate one speaker or one subwoofer. View larger Fixed High-Pass Crossover
Speakers also reproduce sound based on high, low or mid-range frequencies. High pass crossovers are geared specifically towards highs such as all size speakers, mid ranges and tweeters. Unlike the Variable Low-Pass Crossover mentioned above, you are not able to set exact sound specifications such as the bass, mid-range and high frequency reproduction. This High-Pass Crossover is fixed. View larger Low And High Level Inputs
The CER series amplifiers have two different ways that you can get a signal into it. One is called Low level input and the other is called High level input. A low level input is measured in voltages. It comes in the form of RCA outputs from the back of your receiver and goes to the RCA inputs on your amplifier. A high level input is measured in wattages. It comes in the form one positive and one negative wire from the back of your receiver to and goes to the input terminal of your amplifier in the same wire form. Low-level (RCA) input wiring is preferred for best audio performance. Always use a high-quality RCA cable for best audio performance. Do not connect BOTH the high level and low level inputs from your receiver to your amplifier at the same time! View larger Variable Bass Boost
The difference between Bass Boost and Variable Bass Boost is that with Bass Boost you either have extra bass or you dont. But with Variable Bass Boost you have the control of exactly how much bass you want to pump out to your subwoofer(s). And this is what you get with the CER700.2 Amplifier: Variable Bass Boost. View larger Variable Low-Pass Crossover
Subwoofers reproduce sound based on a number of different low-range frequencies. This process is called the crossover effect and occurs because the vast majority of audio systems cannot cover the entire spectrum sufficiently to minimize sound distortion and maintain an appropriate frequency ratio. In the case of our CER700.2 amplifier, a variable crossover is offered so that you, the listener, can have the ability to set the frequency at which the crossover occurs, thereby setting specific sound specifications for the bass frequency reproduction. Remote Subwoofer Level Control
View larger General Features Bridgeable Outputs (except CER2100M CER1700M CER1200M) 2 Ohm Stable Stereo Operation With Output Power Increase Thermal, Overload and Speaker Short Protection Soft Turn-On Circuit5. Remote Turn On / Turn Off circuit Nickel Plated RCA Low Level And High Level Inputs LED Power and Protection Indicators Black Anodized Heatsink

Shipping and Returns

• We offer tracked shipping on all orders. Tracking information will be shared as soon as the order is dispatched.
• Please check the delivery estimate before adding a product to the cart. This is displayed for every product on the website.
• Available shipping methods and charges will be displayed at the time of checkout, depending on your exact location.
• All customers are entitled to a return window of 14 days, starting from the date of delivery of the product(s).
• Customers are advised to read our return policy for details of the return process, eligibility, refunds as well as cancellations or exchanges.
• In case of any issues or concerns about Shipping or Returns, please contact us and we will be happy to help.