Black Sleeved 16 Inches ATX PSU IDE Molex to 4 X PWM 4-pin CPU Case Cooling Fan Splitter Hub Power Adapter Cable W/RPM Feedback

MILKWEED

Black Sleeved 16 Inches ATX PSU IDE Molex to 4 X PWM 4-pin CPU Case Cooling Fan Splitter Hub Power Adapter Cable W/RPM Feedback

£58.92 £98.20
Save 40% (£39.28)
  • Order within 15 hours and 16 minutes to get between May 21 - May 27
  • Tracked Shipping on All Orders
  • 14-Day Returns
  • Secure Payments
  • 24/7 Customer Support
Buying Bulk?

Description

  • Black Sleeved 16 Inches ATX PSU IDE Molex To 4 X PWM 4-pin CPU Case Cooling Fan Splitter Hub Power Adapter Cable W/ RPM Feedback
  • Color :black sleeved cable
  • Wire Gauge: 26AWG Tinned Copper - UL1007 Wire
  • Cable Length: 16 inch
  • Connector A: 1 - 5.25" Molex 4 pin LP4 Male


Features

Power from PSU Molex 4-pin LP4,supporting four PWM fans from a single motherboard header

Since only one RPM signal can be read by one motherboard connector, only one 4 TIPS CONNECTOR of the fan splitter cable carries an RPM signal; thus the motherboard will only read the RPM signal of the PWM device that is connected to full 4-pin connector.

The other three male connectors are missing the pins of tachometric signal,ensure your fan speed monitor won't bounce all over the place from getting three sense signals.Guarantee motherboard getting an accurate RPM signal.

Only one of the four fans sends its tach signal (the one with full 4-pin connector) reports its RPM, but the others will still follow the PWM signal.

TX4 4-pin female connect to motherboard Fit Compatible RPM feedback,allowing all fan speed to be synchronized with CPU load

Compatible with 4pin PMW fan connector and 3pin fan connector (Due 3pins no PWM controller, 3pin fans would run in full speed.)

Power from PSU 12V DC only,do not utilize Fit Compatible 5V DC fan

Sleeved in a black is enhanced cable management,enclosure to provide a sleeker look that seamlessly integrates into the case's interior

Specifications

Color :black sleeved cable
Wire Gauge: 26AWG Tinned Copper - UL1007 Wire
Cable Length: 16 inch
Connector A: 1 - 5.25" Molex 4 pin LP4 Male
Connector B: 1 - TX4 4-pin Female Fit Compatible RPM feedback -Connect to motherboard
1- TX4 4-pin Male
3 - TX4 4-pin Male (3 wires only,missing the pin of tach)
Voltage:12V DC

Note:
Only the fan on 'CPU Fan' channel is used Fit Compatible monitoring.
All connected fans are following the same PWM signa, speed control is the same Fit Compatible all fans when use fan controller software like AI stuite/Xspert FAN and EASY TUNE,etc
PWM capable connectors must necessarily be 4-pin, but not all 4-pin motherboard conne

Shipping and Returns

  • We offer tracked shipping on all orders. Tracking information will be shared as soon as the order is dispatched.
  • Please check the delivery estimate before adding a product to the cart. This is displayed for every product on the website.
  • Available shipping methods and charges will be displayed at the time of checkout, depending on your exact location.
  • All customers are entitled to a return window of 14 days, starting from the date of delivery of the product(s).
  • Customers are advised to read our return policy for details of the return process, eligibility, refunds as well as cancellations or exchanges.
  • In case of any issues or concerns about Shipping or Returns, please contact us and we will be happy to help.
Black Sleeved 16 Inches ATX PSU IDE Molex to 4 X PWM 4-pin CPU Case Cooling Fan Splitter Hub Power Adapter Cable W/RPM Feedback

Milkweed.

Black Sleeved 16 Inches ATX PSU IDE Molex to 4 X PWM 4-pi...

£58.92 £98.20
Save 40.0% (£39.28)